中国高尔夫球场时空演变、影响因素和扩散模式     

金万富  何广静  陈乐 《热带地理》2020,40(3):515-524

利用空间分析和数理统计等方法探究了1984—2016年中国高尔夫球场数量时空演变、影响因素和扩散模式。结果表明：1）球场数量变化经历了低速增长期、稳定增长期、加速增长期和紧缩期；2）球场空间分布范围经历了扩张期和收缩期，向北、向西扩散较为明显；3）目前球场主要分布在经济发展水平较高且外向型经济突出的长三角、珠三角和环渤海地区；4）人均GDP、人口规模、区域开放程度、交通优势度、气候类型和土地资源稀缺性与球场空间分布均呈显著正相关，其中交通优势度相关系数最大；5）高尔夫球场空间扩散模式兼具接触性扩散和等级性扩散。  相似文献   

乌鲁木齐公共交通基础设施对低收入群体就业的影响研究     

张纯  程志华  于晓萍  王亚群  沈忱 《地理科学进展》2020,39(1):111-119

中国西部城市在大规模、快速度和高投资的交通基础设施推进的同时,审视其建设的社会经济效益就显得尤为重要。尤其对于城市低收入群体来说,公共交通基础设施投入是否能对提升就业水平、提升整体生活品质产生积极作用,值得规划者和决策者关注。论文基于乌鲁木齐2014年居民交通出行调查数据,采用带有交叉变量的多元线性回归和多元Logit回归方法,考察快速公交(Bus Rapid Transit, BRT)对于提升低收入群体就业可达性和通勤满意度的影响。分析结果显示：在就业可达性方面,低收入、男性和拥有住房产权者的通勤时间更长,距离BRT车站越近则通勤时间更短,私家车出行的通勤时间更长;在通勤满意度方面,低收入群体的通勤满意度水平更低,距离BRT车站近、选择私家车出行的通勤满意度水平更高。分析也表明,通勤时间短,通勤满意度水平不一定就高。这些研究结果表明,整体上公共交通基础设施建设对于提升就业可达性和满意度有着积极的带动作用,但个体经济社会属性的差异影响也不可忽视。研究乌鲁木齐公共交通基础设施对就业可达性和满意度的影响,有助于帮助西部城市制定提升低收入群体整体就业水平的公共政策,尤其对于促进地方就业稳定和带动区域经济发展有重要意义。  相似文献   

Theory and measurement model of administrative region potential from a perspective of administrative division adjustment: Taking Chongqing city as a case study     

Wang  Kaiyong  Wang  Fuyuan 《地理学报(英文版)》2020,30(8):1341-1362

Journal of Geographical Sciences - There is a lack of basic theory and method to examine the effect of administrative division (AD) adjustment on the regional development. Based on the theory and...  相似文献   

利用短期静态PPP结果反演海潮负荷位移     

魏国光  王琪洁  彭葳  郭良琦 《大地测量与地球动力学》2019,39(6):607-612

采用香港11个GPS测站的观测资料进行1 h、2 h、3 h和4h静态PPP解算，获得4组PPP坐标序列，利用调和分析求取11个测站处8个主要分潮的负荷位移参数（振幅和相位），将其与海潮模型计算的负荷位移参数进行对比，并比较分析PPP反演值与海潮模型值改正海潮负荷信号的效果。结果表明，垂直和水平方向上，不同PPP结果反演8个分潮的负荷位移分别具有约5 mm和7 mm的差异；PPP反演8个分潮垂向负荷位移优于全球海潮模型，但水平方向上的反演效果稍弱。  相似文献   

Experimental investigation of tsunami bore impact pressure on a perforated seawall     

《Applied Ocean Research》2019

Catastrophic failures of many tsunami barriers along the affected coasts during the 2011 Tohoku earthquake tsunami has prompted extensive investigation into improving and revising design codes for tsunami defence structures. To date, researchers and coastal engineers are investigating to understand the failure mechanisms and to find solutions so that the structures merely remain intact in the extreme event such as tsunami. Thus, the present work is motivated to experimentally study tsunami-induced bore pressures exerted on vertical seawalls; a solid vertical wall and a porous vertical seawall that consisted of a perforated front wall and a solid rear wall. Bores with various heights and velocities were generated by using the dam-break method. A porous seawall with 20% porosity of perforated front wall was used in this study. Bore pressures exerted on the solid rear wall and chamber oscillations that occurred in the experiments were also discussed. The experimental results showed that multiple peak pressures were observed during bore run-up phase in the time series of bore impacts. A predictive equation to estimate the maximum bore pressure on a perforated seawall was developed using multiple regression analysis. The proposed equation was also compared with previous empirical formulas.  相似文献   

加权混合估计中权值的确定方法     

宋迎春  宋采薇  左廷英 《测绘学报》2020,49(1):34-41

综合了大地测量中各种异方差多源观测模型和联合平差方法,说明了混合估计方法可以用于测量数据融合,平衡附加信息和样本信息对参数估计的影响。通过求取权值使参数估计的协方差阵的迹最小的方法,给出了一个权的最优选择方法。本文扩展了已有的加权混合估计方法,使得新方法中的权不受验前单位权方差的限制,能有效应用于大地测量数据处理。  相似文献   

山地叶面积指数反演理论、方法与研究进展   总被引：2，自引：0，他引：2  

江海英  贾坤  赵祥  魏香琴  王冰  姚云军  张晓通  江波 《遥感学报》2020,24(12):1433-1449

叶面积指数LAI（Leaf Area Index）是表征叶片疏密程度和冠层结构特征的重要植被参数，在气候变化、作物生长模型以及碳、水循环研究中发挥着重要作用。遥感是获取区域及全球尺度LAI的一个重要手段，当前LAI产品主要基于遥感数据反演得到，但是多数LAI产品算法并未考虑地形特征的影响，导致山地LAI遥感反演精度不确定性大。提高山地LAI遥感反演精度亟需考虑地形因子对冠层反射率的影响，其中山地冠层反射率模型和遥感数据地形校正是提升山地LAI遥感反演精度的关键。本文围绕山地LAI遥感反演理论与方法，综合分析了国内外山地冠层反射率模型和地形校正模型的研究进展，总结了目前山地LAI遥感反演存在的问题，并讨论了未来研究的发展趋势。  相似文献   

Lidar-aided analysis of boreal forest backscatter at Ku band     

《International Journal of Applied Earth Observation and Geoinformation》2020

This paper analyzes the backscatter of the microwave signal in a boreal forest environment based on a Ku -band airborne Frequency-Modulated Continuous Waveform (FMCW) profiling radar—Tomoradar. We selected a half-managed boreal forest in the southern part of Finland for a field test. By decomposing the waveform collected by the Tomoradar, the vertical canopy structure was achieved. Based on the amplitude of the waveform, the Backscattered Energy Ratio of Canopy-to-Total (BERCT) was calculated. Meanwhile, the canopy fraction was derived from the corresponding point cloud recorded by a Velodyne VLP-16 LiDAR mounted on the same platform. Lidar-derived canopy fraction was obtained by counting the number of the first/ the strongest returns versus the total amount of returns. Qualitative and quantitative analysis of radar-derived BERCT on lidar-derived canopy fraction and canopy height are investigated. A fitted model is derived to describe the Ku-band microwave backscatter in the boreal forest to numerically analyze the proportion contributed by four factors: lidar-derived canopy fraction, radar-derived canopy height, the radar-derived distance between trees and radar sensor and other factors, from co-polarization Tomoradar measurements. The Root Mean Squared Error (RMSE) of the proposed model was 0.0958, and the coefficient of determination R2 was 0.912. The fitted model reveals that the correlation coefficient between radar-derived BERCT and lidar-derived canopy fraction is 0.84, which illustrates that lidar surface reflection explains the majority of the profiling /waveform radar response. Thus, vertical canopy structure derived from lidar can be used for the benefit of radar analysis.  相似文献   

Study of irregular wave run-up over fringing reefs based on a shock-capturing Boussinesq model     

《Applied Ocean Research》2019

This paper presents the results of a parametric study of irregular wave run-up over fringing reefs using the shock-capturing Boussinesq wave model Funwave-TVD to better understand the role of fringing reefs in the mitigation of wave-driven flooding. Laboratory experiments were newly performed with a typical fringing reef profile and typical hydrodynamic conditions to validate the model. Experimental data shows irregular wave run-ups are dominated by the low-frequency motions and confirms the run-up resonant phenomenon over the back-reef slope, which has been revealed in previous numerical studies. It is demonstrated that irregular wave evolution and run-up over fringing reefs are reasonably reproduced by the present model with a proper grid size. However, the infragravity run-up height and highest 2% run-up height over the back-reef slope are under-predicted due to the underestimation of the infragravity wave height over the reef flat. The validated model was then utilized to model irregular wave transformations and run-ups under different conditions. Through a series of numerical experiments, the effects of key hydrodynamic and reef geometry parameters, including the reef flat width, water depth over the reef flat, fore-reef slope angle and back-reef slope angle, on the irregular wave run-up were investigated. Variations of spectral components of irregular wave run-ups were examined to better understand the physical process underlying the effect of each parameter.  相似文献   

Damage assessment for submarine photoelectric composite cable under anchor impact     

《Applied Ocean Research》2018

The impact of dropped anchor on submarine photoelectric composite cables may possibly cause electrical faults, i.e. electricity and optical signal transmission failure. In order to study the impact capacity and structural impact failure mechanism, a test setup is designed originally to examine the structural and functional integrity. A detailed finite element model (FEM) is created, considering material nonlinearity and component interaction. A parametric analysis has been performed to predict the deformation of components and impact forces, under different impact velocities and collision directions. Relationships between the armor layer indentation rate and that of internal power and optical units are achieved. The impact deformation of internal entities can be evaluated intuitively by armor layer indentation. The proposed experimental and numerical methods are well correlated, suitable to assess the impact capacity of subsea power cables and assist the protection design of subsea power cables in engineering.  相似文献